FlashCheck Ruggy Thermocouple Thermometer Kit
The FlashCheck Ruggy Thermocouple Thermometer Kit is used by the food service professionals and quality control inspectors to verify temperatures of foods and equipment throughout preparation, storage, and handling of food. This thermometer kit also can be used from the lab to the production floor. The thermometer kit includes the FlashCheck Thermocouple Thermometer, the boot (a protective enclosure), and probe.
The FlashCheck Ruggy thermocouple thermometer has a sturdy armored construction encasing for the base unit. The FlashCheck Ruggy gives you maximum durability, versatility and protects the base from bumps or spills.
- Sturdy protective rubber enclosure
- Ideal for food service and quality control inspectors
- NSF Certified
- Switchable °F/°C
- Three interchangeable K type probes available
- Large LCD Display
- IP54 Splash Proof
| Model | Overview |
| Model 25050 |
Measurement range: -76°F to 752°F (-60°C to 400°C)
|
Model 25051 |
Measurement range: -76°F to 752°F (-60°C to 400°C)
|
Model 25052 |
Measurement range: -76°F to 1112°F (-60°C to 600°C)
|
| Feature | Specification |
|---|---|
| DeltaTrak manufactures products under an ISO 9000 registered quality management system | |
| Measurement Range (probe) | -76°F to 1112°F (-60°C to 600°C), dependent on probe |
| Operating Range (base unit) | 32 to122°F (0 to 50°C) |
| Display Resolution | 0.1°F/°C 33.6 to 391.8°F (-9.9 to 199.9°C), 1.0°F/°C above 391.9°F(200°C) |
| Accuracy | ±1% of reading or 1.8°F (1°C) whichever is greater, from -4°F to 284°F (-20°C to 140°C). Otherwise 2% of reading. |
| Battery/Life | CR2032 lithium cell/100 hours continuous use |
| Body Dimensions | 3 x 1.7 x 0.8 in. (78 x 42 x 20 mm) |
| Weight | 1.42 oz. (40.15 grams) including battery |
| Certification | CE Mark, NSF |
| IP Rating | IP54 Splash Proof |
| Thermometer and probes are also available individually. EMC/RFI: Readings may be affected if the unit is operated within radio frequency electromagnetic field strength of approximately 3 volts per meter, but the performance of the instrument will not be permanently affected. | ||
| Model | Probe | Temperature Range |
| 25054 Reduced Tip Probe (4" long, 101.6mm, tip dia. 2.33mm w/39.56mm cable) |
 |
-76°F to 752°F (-60°C to 400°C) |
| 25055 Surface Probe (7.5" long, 190mm w/39.56mm cable) |
 |
-76°F to 752°F (-60°C to 400°C) |
| 25056 Needle Probe (4.4"long, 112mm, tip dia. 1.6mm w/39.56mm cable) |
 |
-76°F to 1112°F (-60°C to 600°C) |
| 25003 - Thermocouple Thermometer Base Unit |  |
|
| 25053 Rubber Enclosure |  |
|
